Search products
Categories
Search product
Categories
Semitron® ESd 410C (PEI)
Brand: 
- Permanently antistatic
- Static charge dissipation (5 kV) in less than 2 seconds
- Metal- and graphite/coal dust-free
Interested in this product?
Excellent mechanical properties up to 210 °C allow for ESd solutions at very high temperatures.
This material also has excellent dimensional stability (low coefficient of linear thermal expansion and water absorption) and is thus the ideal choice for equipment handling in the electric, electronic, and semi-conductor industries.
Specifications
- Permanently antistatic
- Static charge dissipation (5 kV) in less than 2 seconds
- Metal- and graphite/coal dust-free
| Properties | ISO / (IEC) standard | Unit of measurement | Value |
| General properties | |||
| Colour | black | ||
| Density | 1183-1 | g/cm3 | 1.41 |
| Water absorption: | |||
| - after 24/96 h immersion in | 62 | mg | -- |
| water at 23 °C | |||
| 62 | % | -- | |
| - at saturation in air of 23 °C / 50% RH | -- | % | 0.6 |
| - at saturation in water of 23 °C | -- | % | 1.1 |
| Thermal properties | |||
| Melting temperature | 11357-1/-3 | °C | -- |
| Glass transition temperature | 11357-1/-2 | °C | 215 |
| Thermal conductivity at 23 °C | - | W (K.m) | 0.35 |
| Average coefficient of linear thermal expansion: | |||
| - average value between 23 and 100 °C | - | m/(m.K) | 40x10-6 |
| - average value between 23 and 150 °C | - | m/(m.K) | 45x10-6 |
| - average value above 150 °C | - | m((m.K) | 45x10-6 |
| Deflection temperature under load: | |||
| - method A: 1.8 MPa | 75-1/-2 | °C | 200 |
| Max. operating temperature in air: | |||
| - for short periods | - | °C | 200 |
| - continuously: min. 20.000 h | - | °C | 170 |
| Min. operating temperature | -20 | ||
| Flammability: | |||
| “Oxygen index” | 4589-1/-2 | % | 47 |
| - according to method UL 94 | - | - | V-0/V-0 |
| (1.5/3 mm thickness) | |||
| Mechanical properties at 23 °C | |||
| Tension test | |||
| - Tensile stress at yield / Ultimate tensile strength | 527-1/-2 | MPa | NYP/62 |
| - Tensile strain at break | 527-1/-2 | % | 2 |
| - Tensile modulus of elasticity | 527-1/-2 | MPa | 5850 |
| Compression test | |||
| - Compressive stress at 1% nominal strain | 604 | MPa | 44 |
| - Compressive stress at 2% nominal strain | 604 | MPa | 76 |
| Charpy impact strength - unnotched | 179-1/1eU | kJ/m2 | 20 |
| Charpy impact strength - notched | 179-1/1eA | kJ/m2 | 4 |
| Ball indentation hardness | 2039-1 | N/mm2 | -- |
| Rockwell hardness | 2039-2 | - | M 115 |
| Electrical properties at 23 °C | |||
| Dielectric strength | (60243-1) | kV/mm | -- |
| Volume resistivity | (60093) | Ohm.sq | 104-106 |
| Surface resistivity | ANSI/ESD | Ohm.sq | 104-106 |
| STM 1111 | |||
| Relative permittivity Â: | (60250) | -- | -- |
| at 100 Hz | |||
| at 1 MHz | (60250) | -- | 3 |
| Dielectric dissipation factor. tan ‰: | (60250) | -- | -- |
| at 100 Hz | |||
| at 1 MHz | (60250) | -- | 0.02 |
| Comparative Tracking Index | (60112) | -- | -- |
| (CTI) |
Although the information provided in this product data sheet is confirmed by reliable research, POLITECNICA CETAI shall not take any responsibility for the application, processing or use of such information.
Share